Written by
Dan Simms
The average cost for a bathroom remodel in North Carolina is approximately $11,712. Click below to get an accurate estimate for your bathroom renovation project in NC.
Bathroom remodeling services in North Carolina typically cost around $11,712, with most projects falling between $5,856 and $16,592. The price will depend on the project’s scope, the materials you choose, and your bathroom size.
For example, refreshing a powder room could cost as little as $2,440, while a complete transformation of a main bathroom may run up to $53,680.
Quick Takeaways
On average, a bathroom remodel in North Carolina costs $11,712.
You can bring your total down to an average of $5,856 by choosing budget-friendly materials, keeping any fixtures and surfaces you can, and avoiding changing the layout.
To boost your home's value, choose materials and design trends that are popular in North Carolina.
Bathroom remodels in North Carolina vary from $2,440 to $53,680, though some projects may be cheaper if you take on certain tasks yourself. The following factors will help you better estimate your costs.
The type of bathroom you have will play a significant part in determining costs. Smaller bathrooms tend to cost less to remodel due to their reduced square footage and simpler fixtures.
North Carolina has been seeing a high rate of new construction in recent years, with over 750,000 new homes built since 2010. You're more likely to see larger bathrooms all around and a higher number of master bathrooms, both of which are modern trends in newer construction. As a result, bathroom remodel costs could be higher, on average, than they would in other states.
Bathroom Type | Average Cost to Remodel in North Carolina | Typical Cost Range in North Carolina |
Powder room | $4,026 | $2,440 to $5,612 |
Half bathroom | $4,636 | $2,928 to $6,344 |
Full bathroom | $11,712 | $7,320 to $19,520 |
$17,080 | $8,784 to $25,376 | |
Master bath | $25,864 | $14,640 to $37,088 |
Luxury | $39,040 | $24,400 to $53,680 |
Bathroom size plays a key role in both material and labor costs. On average, North Carolinians spend about $293 per square foot for a bathroom remodel, with prices typically ranging from $146 to $415.
To estimate your total cost, measure your bathroom's square footage and multiply by the average price listed above. Larger bathrooms often have higher costs due to more materials and work involved.
For reference, the average size for a full bathroom in North Carolina is about 40 square feet, with remodel costs averaging $11,712.
Bathroom Size (Sq. Ft.) | Cost to Remodel |
40 | $11,712 |
50 | $14,640 |
75 | $21,960 |
100 | $29,280 |
150 | $43,920 |
200 | $58,560 |
If your remodel involves rearranging fixtures like the toilet, sink, shower, or tub, you’ll likely need to relocate some utility lines — and that comes with extra costs. Sticking to your current layout is one of the easiest ways to stay on budget.
The exact cost to move plumbing or electrical lines depends on how much work is involved, but in North Carolina, it typically runs around $1,757. You can get a more accurate idea by checking the average hourly labor rates below.
Professional | Hourly Cost in North Carolina |
Plumber | $122 |
Electrician | $73 |
The cost to remodel a shower or tub area in the Tar Heel State will depend on the materials chosen and the type of shower or tub. This area is usually the most expensive part of a bathroom remodel.
Below are the average costs for the different types of shower and tub remodel options.
Type of Shower/Tub | Average Cost in North Carolina |
Freestanding tub | $5,466 |
Tub/shower combo (prefab) | $903 |
Walk-in shower (prefab) | $4,880 |
Tub/shower combo or walk-in shower (custom) | $7,808 |
Tub-to-shower conversion | $3,904 |
Toilet installation in North Carolina typically averages around $732, with costs varying based on toilet type. While elongated toilets are the most widely used in NC, round bowls are usually preferable in more compact bathrooms. Homeowners can also choose from a variety of styles and flushing mechanisms designed to meet specific functional and aesthetic requirements.
On average, replacing your bathroom vanity and countertops in North Carolina will cost about $1,171. Of course, the total can change depending on the size of the vanity and what materials you pick.
For example, a small vanity for a half bath might only cost around $293, while something bigger for a master bathroom could set you back up to $2,928.
When it comes to countertops, material choice really matters. Marble is one of the pricier options at $70 to $190 per square foot, while quartz gives you a stylish look for less (typically $50 to $75 per square foot).
Installing a backsplash in your bathroom averages out to about $976 in North Carolina. Depending on the material, your total could range between $488 and $1,464. Not sure what style fits your space? An interior designer can help you pick the perfect match.
In North Carolina, redoing your bathroom floors costs around $1,757 on average, with prices falling between $976 and $2,928 based on the bathroom flooring materials and square footage.
Ceramic and porcelain tile are the most common picks in NC, but luxury vinyl tile (LVT) is also a favorite thanks to its durability and style. The chart below breaks down average costs per square foot to help you estimate your project budget.
Flooring Type | Cost Per Square Foot |
Ceramic/porcelain tile | $10 to $20 |
Linoleum sheet | $3 to $12 |
Luxury vinyl plank (LVP) | $4 to $15 |
Luxury vinyl tile (LVT) | $4 to $15 |
Natural stone | $20 to $50 |
In North Carolina, labor makes up a big part of your bathroom remodel cost — typically between 40% and 60% of your total budget, or about $4,685 to $7,027. If you live in a pricier area like Charlotte, Raleigh, and Greensboro, expect labor to land at the higher end of that range.
That percentage could shift depending on your approach. If you're going high-end with materials or doing some of the work yourself, you might spend less on labor. But if you’re using lower-cost finishes or getting into detailed custom work, labor could climb up to 70%.
Keep these additional expenses in mind when planning your bathroom remodel budget.
In the remodeling process, demolition comes first, and it’s more than just swinging a hammer. It can cost between $200 and $500 to demolish your old bathroom. And to dispose of the waste, dumping fees average around $293 in North Carolina. When getting a quote, make sure these costs are included in the contractor's estimate.
Sometimes, demolition uncovers hidden problems like mold or water damage. Mold remediation and repair can cost about $2,928 in North Carolina, depending on how much repair work is needed.
If your remodel includes major updates, you'll likely need permits. Most contractors will pull and close them for you, but you’ll still need to cover the fees, which usually range from $146 to $390 in NC.
Bathroom remodels in North Carolina can get pretty pricey — sometimes hitting $53,680. Here are some financing options you may consider to fund your dream reno:
Home improvement loan: A great option for remodeling, with lower interest rates than personal loans since your upgrades can boost home value.
Home equity line of credit (HELOC): If you’ve built equity in your home over time, a HELOC lets you borrow against it to cover remodel costs.
FHA 203k loan: If you’re purchasing a home and want to remodel the bathroom before moving in, a 203k loan could be a great option. This renovation loan allows you to finance above the property’s value, with the additional funds going toward remodeling.
Want to make your bathroom remodel more budget-friendly? Here are some tips:
Choose more budget-friendly materials: Your choice of finishes and fixtures plays a huge role in your budget. Go budget-conscious and you could spend as little as $5,856, or go luxe and spend up to $16,592.
Keep your layout the same: Avoid moving plumbing or electrical unless necessary—it can save you about $1,757 on average.
Consider efficiency incentives: Utility companies like Duke Energy might offer cash back or tax incentives for upgrading to energy-efficient plumbing and lighting.
DIY wherever possible: If you're comfortable with basic DIY tasks, like painting or removing old fixtures, you could save a big chunk of the $5,856 usually spent on labor. Just be sure to leave the complex tasks to professional contractors.
Ask around, read reviews, and then make sure your shortlist of contractors is properly licensed. In North Carolina, licenses are issued by North Carolina Licensing Board for General Contractors, so it’s worth checking their database before moving forward.
When you chat with contractors, ask about things like their work process, timeline, how they manage subcontractors, pricing, change orders, and warranties. Most pros will give you a free quote or consultation.
To make it easier, you can also use the tool below to connect with licensed, vetted bathroom remodelers in North Carolina.
While a full-on redesign might be out of reach, you can upgrade a half or standard bathroom within $10,000. Stick to the current layout, go for cost-effective materials, and choose prefabricated shower and tub units to keep costs lower.
The shower and tub are typically the most costly aspects of a bathroom remodel in North Carolina. A walk-in shower or custom tub/shower combo can cost as much as $7,808. To save money, consider choosing prefabricated surrounds instead.
A typical bathroom remodel brings in around a 60% return on investment. So with the average remodel in North Carolina costing $11,712, that could boost your home’s value by roughly $7,027.
Dan was a property manager from 2015 to 2020, during which time he managed and oversaw the upkeep and repairs of over 2,000 residential properties. He uses that experience, as well as his extensive DIY knowledge, to bring reliable information to homeowners about renovations and home-related projects. Since 2020, he has been using his experience to write about home improvement, and his work has appeared on sites like USA Today, CNN, Angi, and Today’s Homeowner.